01
Prepare
The drone is mounted in a harness made for its type and the launch trailer fills the balloon precisely.
Solutions
A balloon carrier that lifts your drone to the right wind layer, carries it to the mission area and releases it there with its battery almost untouched. A surveillance or Earth observation drone, for example, can start its work hundreds of kilometres from the launch site.
How it works
01
The drone is mounted in a harness made for its type and the launch trailer fills the balloon precisely.
02
The balloon climbs at around 5 m/s to the altitude Mission Planner has chosen, up to 25 km.
03
Altitude control holds the wind layer that carries the drone to the area, or keeps it stationed over it.
04
The drone is released over the mission area with its battery nearly full, typically within 5% of the distance travelled.
Key figures
up to
25 km
release altitude, chosen by Mission Planner
up to
500 km
carried distance
about
50%
battery saved
typically
5%
release accuracy, of the distance travelled
up to
15 kg
drone mass
Typical values from our test programme. Final figures depend on the drone, the winds and the route.
Built together with drone makers
Every drone type gets its own harness and release profile, so we work with manufacturers as development partners. We adapt the lift, the safe release and the orientation to your aircraft, and you adapt the flight software for a high-altitude start.


Tell us about your aircraft and your mission, and we will show you what a high-altitude start can add to it.